-
Gel Seal Closure
-
Cold Shrink Tube
-
Tape
-
Cable
-
RF Coaxial Cable Assembly
-
RF Coaxial Connector
-
RF Coax Adapter
-
Lightning Arrester
-
Connector Dust Cap
-
Cable Clamp and Hangers
-
Cable Entry System
-
Grounding Kit
-
Ground Bar
-
Cable Lugs/Terminal
-
Hoisting Grip
-
RF Microwave Devices
-
Other Site Materials
Double Hanger Type Feeder Clamp To Support Cables
Accommodate at most 6 runs cable.
Double hanger type feeder clamps, allow 2 runs of cable fixing for each cable blocks. And the the cable block can be stackable to 3 stacks usually at most. The feeder clamp can be assembled with 1/2/3 stacks cable block, to fix at most 6 runs cable.
Each set of feeder clamp include:
----1. One stainless steel 304 C-shaped angle adapter.
----2. Plastic polypropylene cable block hangers, single/double/triple stacks.
----3. Threaded rod & nut & washers.
C-shaped angle adapter is to be mounted to 1-25mm flat steel, 90degree angle steel or rectangular steel.
Our feeder clamps are widely used on antenna system of wireless cellular sites to fix the RF coaxial cable, DC power cables and fiber optical cables.
Item No |
Applicable Cable OD (mm) |
Nominal Cables |
CC-D05T07-X | 5.0-7.0 | 5.0/7.0mm fiber cable, Lan cable |
CC-D5.5-X | 5.4-6.5 | Firber cable |
CC-D06T7.6-X | 6.0-7.6 | 7.0mm fiber, KMR300, LMR-300 |
CC-D09T12-X | 9.0-12.0 | KMR400, LMR-400, CNT-400, RG8, RG213, RG9 |
CC-D38-X | 10.5-11.5 | 3/8",3/8"S |
CC-D12S-X | 13-14 | 1/2"Superflex |
CC-D12-X | 16-17 | 1/2''Rigid |
CC-D58-X | 16.8-18.0 | RRU power cable |
CC-D19-X | 19.0-21.0 | RRU power cable |
CC-D20-X | 20.0-23.0 | 4AWG RRU power cable |
CC-D23-X | 22.0-24.0 | 25m㎡ RRU power cable |
CC-D78-X | 27.0-28.0 | 7/8" |
CC-D114-X | 39.0-40.0 | 1-1/4” |
CC-D158-X | 50.0-52.0 | 1-5/8" |
X on the item no stands for the cable run number. X=2 by 2 cables, X=4 by 4 cables, X=6 by 6 cables
Double Holes Type Coax Block
Item No: CB-XX-DH
Size: M8, 1/4'', 3/8", 1/2"S, 1/2", 7/8", 1-1/4", 1-5/8" etc. or use with grommet rubber for different size cable freely.
Material: PP
Type: 2 way
Used for trunk line and coax cable.
Hot product recommendation:
Feeder clamp for LMR400 / RG8 coaxial cable
Plasctic 1/2" cable blocks with EPDM rubber cusion.
With U-shaped standoff and 1-1/2" to 3" hose clamp
to be installed on 1-1/2'' to 3'' round pillar.
Material: 304 Stainless steel+PP+EPDM

Single hole feeder clamp

Combined feeder clamp

Combined clamp for power and fiber cable
Newsletter
Please enter your email address and subscribe to our news alerts.