-
Gel Seal Closure
-
Cold Shrink Tube
-
Tape
-
Cable
-
RF Coaxial Cable Assembly
-
RF Coaxial Connector
-
RF Coax Adapter
-
Lightning Arrester
-
Connector Dust Cap
-
Cable Clamp and Hangers
-
Cable Entry System
-
Grounding Kit
-
Ground Bar
-
Cable Lugs/Terminal
-
Hoisting Grip
-
RF Microwave Devices
-
Other Site Materials
High Power Cavity Splitter/Divider And Microstrip Power Splitter
Power(W):50/200/300W
Frequency(MHz):350-2700/698-2700MHz
Connector: N/DIN/4.3-10
Input Ports: 2-way/3-way/4-way
Three Power Splitter/Divider are available from HDG-Telecom. They are High Power Square Cavity Power Splitter, Round Cavity Power Splitter and Low power microstrip Power Splitter (Wilkinson Power Divider).
Power splitter is a kind of device that divides one input signal energy into two or half ways or dividers to deliver equal or unequal energy, or half the signal energy in turn to combine one way output, now also known as a combiner. A certain degree of isolation shall be ensured between the output ports of a power splitter. According to the output usually divided into 2-Way、3-Way、4-Way and so on.

RF 200W/300W High Power Square Cavity Splitter
VSWR: ≤1.20
Power: 200/300W
Impedance:50 ohms
Connector: N-Female/DIN-Female
Frequency: 800-2700/698-2700MHz
Input Ports: 2-Way/3-Way/4-Way

698-2700MHz High Power Round Cavity Splitter
VSWR: ≤1.20
Power: 200/300W
Impedance:50 ohms
Connector: N-Female
Frequency: 698-2700MHz
Input Ports: 2-Way/3-Way/4-Way

Low Power Wilkinson Power Divider / Microstrip Power Splitter
VSWR: ≤1.20
Power: 50W
Impedance:50 ohms
Connector: N-Female
Frequency: 350-550/670-2700MHz
Input Ports: 2-Way/3-Way/4-Way
Can’t find the power splitter you need? Please leave your message to us, customized available!
Newsletter
Please enter your email address and subscribe to our news alerts.