1/2 Coaxial Jumper Assembly With Weatherproof Boots
Item No.:JK12-L-DM-4310M-WB(L=1,2,3...) / Spec:Jumper cable with DIN male to 4.3-10 male connector with weatherproof boots
Category:
RF Coaxial Cable Assembly
Keywords:
1/2 Coaxial Jumper Assembly With Weatherproof Boots
Contact
Product Description
RF Jumper Cable with weatherproofing boot can protect your performance for quick and reliable installation in tight spaces or on multiport devices.
The factory-installed molded boot is designed to seal connector junctions between jumpers, antennas and RRU, and can be installed in seconds without tools.
1.Easier Installation
2.No special tools required
3.Wide temperature range and UV stable
4.Sealing class, IP68
This solution is quicker, easier, and more cost-effective than traditional weatherproofing solutions like Tapes, Cold shrink tubing, gel seal closure...
And if you are interected in weatherproof boot only, you can click this link directly:
HDG introduces an exceptionally easy-to-install weatherproofing boot that ensures watertight sealing in the most extreme environmental conditions as a result of the sleek, close-fitting product design.
The innovative, patent-pending design includes a small drainage channel at the top of the boot to deter water pooling or moisture ingress. It allows for one-handed installation and improves connector longevity in high salinity environments, while protecting other equipment from corrosion and degeneration caused by the elements.
The new boot is waterproof to IP 68 ratings to ensure watertight sealing, safeguard connectivity, and reduce potential downtime and associated costs.
It also helps protect against other extreme weather conditions including wind-driven rain, freezing temperatures.It has been rigorously tested to ensure its high-strength silicone rubber material won trip or tear during installation or product placement.
The weatherproof boots can fits all series jumper cable, and HDG Telecom has designed different models for jumpers with different connectors. And we also welcome to OEM.pls contact us for more information.
|
Part Number:JK12-L-DM-4310M-WB |
Dimensions are in millimeters |
|||
|
Interface |
||||
|
According to |
IEC 61169-54, IEC 60169-4 |
|||
|
Electrical data |
||||
|
Impedance |
50 ohm |
|||
|
Frequency |
DC-6GHz |
|||
|
VSWR |
≤1.12(DC-3GHz) |
|||
|
PIM (@2-tone×20w) |
≤-160dBC |
|||
|
Dielectric Withstanding Voltage |
≥2500V RMS, 50Hz, at sea level |
|||
|
Dielectric Resistance |
≥5000MΩ |
|||
|
Insert Loss |
0.2+(0.209×L)dB |
|||
|
Mechanical data |
||||
|
Mating cycles |
≥100 times |
|||
|
Watertightness |
IP67 |
|||
|
RoHS-compliance |
Full RoHS compliance |
|||
|
Salt-fog test |
96h |
|||
|
Temperature range |
-40℃～+85℃ |
|||
|
Material and plating |
||||
|
Part Name |
Material |
Plating |
||
|
Body |
Brass |
Tri-alloy |
||
|
Insulator |
PTFE |
- |
||
|
Center conductor |
Brass |
Ag |
||
|
Other |
Brass |
Ni |
||
Part Number
JK12-L-DM-4310M-WB
Documentation & Downloads
No Date
Feedback
WRITE A MESSAGE TO US
Related Products
Weatherproofing Rubber Boots For Jumper Cable
Item No.:SRB / Spec.:Weatherproofing Siliance Rubber Boots for 1/2in standard or superflexible, 3/8in superflexible, SPO-250 Jumper Cables / OEM and ODM Available
Add to Inquiry
Low Loss RG Series Braided Cable Assembly
RG213,RG223, RG142, RG405, RG178, RG174, RG402, RG8, RG8X, RG58 jumper cable,Etc... / With N Type connector, SMA connector, BNC connector, TNC connector,Etc... / ODM and OEM Available
Add to Inquiry
3/8in Superflexible Coaxial Jumper Cable
3/8in superflex jumper cable with / 4.3-10 Connector / 7/16DIN Connector / NX10 Connector Etc...
Add to Inquiry