-
Gel Seal Closure
-
Cold Shrink Tube
-
Tape
-
Cable
-
RF Coaxial Cable Assembly
-
RF Coaxial Connector
-
RF Coax Adapter
-
Lightning Arrester
-
Connector Dust Cap
-
Cable Clamp and Hangers
-
Cable Entry System
-
Grounding Kit
-
Ground Bar
-
Cable Lugs/Terminal
-
Hoisting Grip
-
RF Microwave Devices
-
Other Site Materials
Cold Shrink Tube For Cell Site
Materials: EPDM & solid silicone rubber
For Cell Tower site
Cold shrink tubing is a fast and easy way to weatherproof a RF coax connection for cell site. Unlike heat shrink tubing, it can create a permanent seal without applying heat, so it is also known as No-heat shrink tubing.
Simply position the pre-expanded tubing over the connection that you are protecting and pull the rip cord, the tubing will shrink and compresses to form a weatherproof seal.
Regular Size |
1.Silicone Cold Shrink Tube:
Silicone cold shrink tube can be made into any color, such as transparent, gray, blue, etc. And also can printe logo on it.
HDG Item No |
Description |
CST-SMA60 |
For SMA connector, LMR-195 cable or LAN CAT5/6 cable. |
CST-NX10 |
For 1/4s", 3/8s", 1/2s" cable to device with NEX10 connector. |
CST-RET |
For 1/4" , 3/8" , 1/2" s, 1/2" cable to antenna via 4.3-10 or N connector. Also for AISG RET Control cable. |
CST-01 |
For 1/2"S& 1/2" cable to antenna via 7/16 DIN |
CST-KC8 |
For 1/2" S& 1/2" cable to antenna or RRU via 7/16 DIN connector. Also for DC Power Connection on Remote Radio Unit (RRU). |
Other Size can be customized..... |
2.EPDM Cold Shrink Tube:
HDG Item No. |
Description |
CSA-1SSV |
For 1/2" jumper cable to Antenna or RRU via 7/16 DIN, 4.3-10, N type connector. |
CSA-4 |
For 1/2“ jumper cable to 7/8" Feeder cable Via 7/16 DIN, 4.3-10, N type connector. |
CSA-2 |
For 1/2" cable to 1-1/4" or 1-5/8" cable. |
Other Size can be customized..... |
3.Silicone Cold Shrink Tube with Bilateral Built-in Mastic:
HDG Item No. |
Description |
BMC-SD28X110 |
For 1/2" cable to Antenna or device via 4.3-10 connector |
BMC-SD40X140 |
For 1/2" cable to Antenna or device via 7/16 DIN connetor. |
Other Size can be customized..... |
Details |

Item NO.: CST-SMA60
Silicone Mini Cold Shrink Tube for SMA connector, LMR-195 cable or LAN CAT5/6 cable.

Item NO.: CST-NX10
Silicone Cold Shrink Tube for 1/4s",3/8s", 1/2s" cable to device with NEX10 connector.

Item NO.: CST-RET
Silicone Cold Shrink Tube for cell site for 1/4" , 3/8" , 1/2" s, 1/2" cable to antenna with 4.3-10 or N connector.
Also used for AISG Control cable.

Item NO.: CST-01
Silicone Cold Shrink Tube for cell site for 1/2"S& 1/2" cable to antenna with 7/16 DIN connector, 4.3-10 connector or N connector.
It is popular in East Asia and Europe.

Item NO.: CST-KC8
Silicone Cold Shrink Tube for cell site for 1/2"s& 1/2" cable to antenna or RRU with 7/16 DIN connector.
And also for DC Power Connection on Remote Radio Unit (RRU).
It is popular in North America.

Item NO.: CST-11
Silicone Cold Shrink Tube for cell site for 1/2" Cable to 7/8" Cable with DIN-7/16 connector 4.3-10 Connector.

Item No.: CSA-1SSV
EPDM Cold Shrink Tube for cell tower site for 1/2" jumper cable to Antenna, RRU or other device with 7/16 DIN, 4.3-10, N type connector.
Include one 150mm foam tape.

Item No.: CSA-4
EPDM Cold Shrink Tube for cell tower site for 1/2“ jumper cable to 7/8" Feeder cable with 7/16 DIN, 4.3-10, N type connector.
Include one 150mm foam tape.

Item No.: CSA-2
EPDM Cold Shrink Tube for cell tower site for 1/2" cable to 1-1/4" or 1-5/8" cable.
Include two 400mm foam tape.

Item No.: BMC-SD28X110
Silicone Cold Shrink Tube with Bilateral Built-in Mastic for cell tower site for 1/2" cable to Antenna or device via 4.3-10 connector.

Item No.: BMC-SD40X140
Silicone Cold Shrink Tube with Bilateral Built-in Mastic for cell tower site for 1/2" cable to Antenna or device via 7/16 DIN connector.
Feature |
1.Simple installation.
2. No tool or heat required.
3. Seals tight, retains its resiliency and pressure even after years of aging and exposure.
4. Resists acids and alkalies.
5. Resists ozone and ultraviolet light.
6. Operating temperature range- EPDM: -60℃ ~ 150℃.
Silicone: -50℃~200℃
Note:
Regular color is black or grey. Customized color also available by request.
Related Products |
![]() |
![]() |
![]() |
Cold Shrink End Cap | Cold Shrink Breakout | Cold Shrink Handle Grip |
Newsletter
Please enter your email address and subscribe to our news alerts.